From MineOS Wiki
Jump to navigation Jump to search

iptables is the standard firewall software. The syntax is a little bit difficult, but luckily, lots of it can be reproduced very easily since the firewall behavior is very similar for each port. iptables is installed by default with the following rules, but you must use these steps to manually add any other different ports (at least the add and save functions).

Checking iptables rules

<syntaxhighlight lang="bash">

Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT tcp -- anywhere anywhere tcp dpt:http

Chain FORWARD (policy ACCEPT) target prot opt source destination

Chain OUTPUT (policy ACCEPT) target prot opt source destination


Default iptables-rules

A not-yet configured iptables policy is to ACCEPT all input, output, and forward packets. This is an unsecured state. The proper way to secure a server is to lock out ALL inbound contact, and individually add only that which you need. I have determined the following rules to be useful for all MineOS CRUX deployments. You will not need to do this step on stock-installs from the MineOS ISO.

Note: if you are completing this step via PuTTY, it is essential you 'ACCEPT' ssh before you change the default policy to 'DROP'. The order these are listed in is significant.

command inbound outbound port action behavior
iptables -P INPUT ACCEPT matched unaffected * ACCEPT All unmatched packets are ACCEPTED (policy change)
iptables -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT matched unaffected 22 (SSH) ACCEPT Allow SSH inbound
iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT matched unaffected 80 (HTTP) ACCEPT Allow HTTP inbound
iptables -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT matched unaffected 443 (HTTPS) ACCEPT Allow HTTPS inbound
iptables -A INPUT -p tcp -m tcp --dport 25565 -j ACCEPT matched unaffected 25565 ACCEPT Allow MC clients inbound
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT matched unaffected * ACCEPT Permit packets in to firewall itself that are part of existing and related connections.
iptables -P INPUT DROP matched unaffected * DROP All unmatched packets are dropped (policy change)

Adding iptables-rules

The above listed rules are applied by default. Most of the time you will only need to add additional rules and commit them to disk. For example, to open up an additional Minecraft server port, you might type:

You can then test the connectivity, and if all works as expected, save iptables-rules.

Saving iptables-rules

Once you have a working set of rules you are happy with, save them to ensure they persist through reboots.

Applying saved rules

To apply the set of rules generated by iptables-save, execute the following line:

Applying rules on startup

/etc/rc.local is the boot-up script. Any user-specified commands may be entered here, such as iptables. iptables is already autostarted by default.

  1. vi /etc/rc.local
  2. Add iptables-restore < /etc/iptables-rules
  3. Save and quit; reboot

Permitting all traffic

Permitting all traffic by turning off all firewall rules is not advised, but is sometimes useful temporarily in order to better troubleshoot an issue, such as starting Minecraft servers on non-standard ports or using any addons (such as connecting through MySQL remotely or voip apps). These steps are temporary and will be reverted on server reboot:

  1. Accept all traffic by default
  2. Flush all existing rules